濟南抹面砂漿是由填料與聚合物水泥和砂添加劑按照一定比例的公式,可以滿足某些變形沒有破解聚合物砂漿,涂抹建設絕緣層,網布或鋼網在一起形成了抗裂防護層的絕緣系統。下面我們談談抗裂抹面砂漿的用量。

　　Jinan plastering mortar for thermal insulation and crack resistance of exterior wall is an insulation system composed of fillers, polymer cement and sand additives according to a certain proportion formula, which can meet the requirements of some deformation without crack of polymer mortar, applying and constructing insulation layer, and forming crack resistance protective layer together with mesh or steel mesh. Let's talk about the amount of anti crack plaster mortar.

　　在陶瓷微球,外墻外保溫系統,我們知道,根據表面材料分為面漆和磚飾面系統,但兩個不同的完成系統對裂紋保護層的要求也不同,裂紋在涂層和表面裝飾系統網格布是用于堿網格布的保護層、抗裂度保護層厚度應大于3毫米,和不應大于6毫米,保護層和裂紋在磚單板系統用于熱浸鍍鋅焊接鋼絲網或網格布堿網格布,抗裂防護層厚度應大于7毫米,和不應大于10毫米,因此,實際數量的抗裂砂漿不同的完成系統也是不同的。與涂料涂飾系統相比，面磚涂飾系統的用量較大。一般要求單層網抗裂砂漿施工厚度為3-5mm，雙層網層抗裂砂漿施工厚度為3-4mm，第二層網施工厚度為3-4mm。鋼絲網抗裂砂漿的用戶數量與雙層網格的施工數量相同，每次施工數量為3-4mm，共2次。

　　In ceramic microsphere and exterior wall external thermal insulation system, we know that according to the surface materials, it is divided into finishing coat and brick facing system, but the requirements of two different finishing systems for crack protection layer are also different. The grid cloth of crack in coating and surface decoration system is the protection layer for alkali grid cloth, and the thickness of crack resistance protection layer shall be greater than 3 mm, and shall not be greater than 6 mm. The protection layer and crack shall be in the brick veneer system. For hot-dip galvanized welded steel wire mesh or gridding cloth alkali gridding cloth, the thickness of anti crack protective layer shall be greater than 7 mm, and shall not be greater than 10 mm, therefore, the actual number of anti crack mortar different completion systems are also different. Compared with the coating system, the consumption of the brick coating system is larger. Generally, it is required that the construction thickness of single layer mesh anti crack mortar is 3-5mm, the construction thickness of the first layer of double layer mesh anti crack mortar is 3-4mm, and the construction thickness of the second layer mesh is 3-4mm. The number of users of steel mesh anti crack mortar is the same as that of double-layer grid construction, with the construction quantity of 3-4mm each time, 2 times in total.

　　施工中抗裂砂漿用量施工厚度必須符合相關要求，才能保證抗裂保護層的質量，如何在施工中控制抗裂砂漿廢料的成本，可見“如何節約控制抗裂砂漿用量”。

　　In order to ensure the quality of anti crack protective layer, the construction thickness of anti crack mortar must meet the relevant requirements. How to control the cost of anti crack mortar waste in the construction can be seen as "how to save and control the amount of anti crack mortar".

　　以上內容由濟南抹面砂漿廠家整理發布，如果您不了解這方面的裝飾材料或有產品需求可以點擊官網咨詢:http://www.sjzmx.cn/The above content is arranged and released by Jinan plastering mortar manufacturer. If you do not know the decorative materials or have product requirements, you can click the official website for consultation: http://www.sjzmx.cn/